iSMA Products powered by Sedona is the first step training for everyone who’s stepping in to the iSMA products world. During the training you will get the knowledge about iSMA products range and how use them the most efficiently. You will find out how the Sedona environment works and acquire your Sedona Framework programming skills. After the training you will be able to take full advantage of the AAC20 and FCU controllers.
Day 1
9:00 - 17:00
(45 minute lunch break included)
Day 2
9:00 - 17:00
(45 minute lunch break included)
Day 3
9:00 - 17:00
(45 minute lunch break included)
To participate in the second step training the first step training must be completed.
All participants must be provided with training cases.
The connection, hardware and software tests have to be performed at least 5 days before the training.
Good internet connection, at least 4 Mbps/2 Mbps [download/upload]
A computer with a freshly installed operating system (the training is supported by Microsoft Windows 10, Windows 8.1 Enterprise, 2012 R2 Standard)
Each computer should have 2 monitors or a separate computer should be used to display the instructor window
TeamViewer software should be installed on the Workstation computer (computer with Niagara Supervisor software)
At least one external camera per student should be used, with two cameras recommended (two external or one external and one built-in)
All students must be in the same place. Their computers and training kits should be connected to the same network (the same switch; the switch is not included in the training kit)
All computers should be connected to the Internet - it is recommended that computers have two interfaces: - Ethernet for training networks and a second Ethernet or WiFi for internet connection.